中文版 | English +86-13271571946 sales01@superhard-material.com
Home > News > Industry news
CBN Powder
Single Crystal
Micropowder
CBN Coating Powder
Diamond Powder
Synthetic Diamond Powder
Diamond Coating Powder
Polycrystalline Diamond
Nano Diamond
Diamond Products
Diamond Grinding Paste
Diamond Grinding Fluid
Grinding Wheels
Common Grinding Wheel Problems and How to Check and Fix Them
1.What Problems Caused Your Grinding Wheels Dressing Frequently? And What are Solutions for it?
 --Potential Reasons:
 (1). Not Enough Dressing.
 (2).Poor Filtration and Insufficient Cooling.
 (3).High Grinding Speed
 (4).Small Feeding
 (5).The Grinding Wheel Too Hard
--Measures of Remediation:
(1).Re-dressing as suggested.
(2).Follow the coolant Recommendations.
(3).Lower the grinding speed.
(4).Increase the Feeding Rate
(5).Replace the Soft Grinding Wheels.
 
2.What Caused the Excessive Wear of Grinding Wheel? And the How to Improved it Accordingly?
--Potential Reasons:
 (1).Insufficient Coolant in Grinding Area
 (2).Lower Rotation Speed
 (3).Too Much Feeding Rate.
 (4).The Grinding Wheel too Soft.
--Measures of Remediation:
(1).Increase Flow, Increase Pressure, Improve the Design and Layout.
(2).Increase the Speed of the Grinding Wheel of the Grinding Wheel, to Make it Harder.
(3).Decrease the Feeding Rate.
(4).Change a Harder or Thicker Wheel, Increase the Speed of Grinding Wheels.
 
3.What Caused the Overheating or Burn of Grinding Wheel? And the How to Avoid Such Problems?
--Potential Reasons:
 (1). Insufficient Coolant in Grinding Area
 (2).High Grinding Wheel Speed
 (3).High Speed of Feeding Rate
 (4).The Grinding Wheel too hard.
 (5).Insufficient Cooling or cooling in the wrong direction.
--Measures of Remediation:
(1). Increase Flow, Increase Pressure, Improve the Design and Layout.
(2).Reduce the Speed of Grinding Wheel
(3).Reduce the Feeding Rate
(4).Change to a softer grinding wheel.
(5). Follow the coolant Recommendations.